Kozy Heat Fireplaces Komfort Zone KZK-1510A Mode D'emploi page 3

1.0 Introduction
1.1 Kit Contents
ALL kit contents must be installed.
•
(2) 15" plenums
•
(2) Air Grilles
•
(8) 6" collars - (4) to attach to the bottom of the plenums;
(4) to attach to the unit where the cover plates are re-
moved.
Figure 1.1 - #KZK-038
KZK-1510A
•
(1) KZK-410-6 (sold separately) is used for a 10' vent run. If
you are mounting the plenum above the fireplace 10' (3m)
or less, use (1) KZK-410-6 kit.
•
KZK-CPL6 (sold separately) is (6) 6" couplers that connect
(2) KZK-410-6. You will only need (4) 6" couplers for instal-
lation. If you are mounting the plenum above the fireplace
between 10' to 20', you will need (2) KZK-410-6 kit and (1)
#KZK-CPL6 coupler kit.
Figure 1.2 - #KZK-410-6
3 Rev. 10 — May 2023