Grundfos DME 2 Notice D'installation Et D'entretien page 19

4.17 Resetting
When "DEFAULT" is activated, the pump will return
to the factory settings.
Fig. 18
Operating display
4.18 Return
Fig. 19
The "RETURN" function makes it possible to return
from any level in the menu to the operating display
without changes after the menu functions have been
used.
Note: The calibration is also set back to the default
setting. This means that a new calibration is required
when the "DEFAULT" function has been used.
Operating display
without changes
4.19 Language
The display text can be displayed in one of the fol-
lowing languages:
• English
• German
• French
• Italian
• Spanish
• Portuguese
• Dutch
• Swedish
• Finnish
• Danish
• Czech
• Slovak
• Polish
• Russian
19