Abus RWM300 Manuel D'utilisation Et D'installation page 29

The device is a closed system. Any
attempt to open the device, by what-
ever means, not only invalidates any
existing warranty but also results in
the device no longer being fit for its
intended use, or permitted for such
use ! Do not open the device under
any circumstances as doing so may
result in personal injury!
A change of battery is not required
and is excluded for technical reasons.
You should protect the device, particu-
larly during renovation work but also
in general, from moisture, cold, heat,
particulate matter, oil, nicotine and
paint fumes and from decorating
materials such as wall paint, adhe-
sives and dirt of any kind. During
renovation, construction or sanding
works, the smoke alarm should be
removed from the magnetic holder
by gently pulling downwards (III.)
and stored in a safe place. Do not
forget to fit the smoke alarm
back onto the magnetic holder (III.)
when the work is completed !
MoAnltg RWM 300_DE_GB_FR_NL_IT_150716.indd 29
IMPORTANT NOTE:
Only when the device is situated in its
intended mounting location, clean,
undamaged and activated, can it
perform its potentially life-saving
function of warning against fire !
Trigger test tone
TESTING, MAINTENANCE AND SERVICING
This smoke alarm automatically tests
its functional readiness once every
minute. It automatically adjusts the
sensitivity of its detection optics
according to the prevailing environ-
mental conditions. If the energy
reserves of the smoke alarm are
depleted or the detection optics are
so contaminated that it can no longer
adjust itself, the device indicates this
situation in good time so that you
– 29 –
GB
Fig. 5
16.07.15 14:32