GYS PROGYS FLEX 280 CEL Mode D'emploi page 20

MADE IN FRANCE
Recommended combinations / electrode grinding
0,3 - 3 mm
DC
2,4 - 6 mm
4 - 8 mm
6,8 - 8,8 mm
9 - 12 mm
To optimise the welding process, it is recommended to grind the electrode prior to the welding, as described below:
REMOTE CONTROL
The remote control operates in TIG mode and in MMA.
ref. 045699
Connection
1- Plug the remote control into the connection at the back of the machine.
2- The machine will detect automatically the remote control and open a selection menu:
Foot pedal selection.
Remote control with potentiometer selection.
Remote control is connected but inactive.
Connection
The TIG 300 DC is equipped with a female socket for a remote control.
The specific 7 pin male plug (option ref.045699) enables connection to the different types of manual remote control
or foot pedal. For the cabling layout, please see the diagram below.
REMOTE CONTROL TYPE
Foot pedal
Operating :
• Manual remote control (option ref. 045675)
The remote control enables the variation of current from 50% to 100% of the set intensity. In this configuration, all
modes and functions of the machine are accessible and can be set.
20
PROGYS FLEX 280 & PROGYS CEL 250
Current (A)
5 - 75
60 - 150
100 - 200
170 - 250
225 - 280
d
G
F
A
B
E
D C
External view
Manual remote control
Ø Electrode (mm)
= Ø wire
(filler metal)
1
1,6
2
2,4
3,2
L = 3 x d for a low current.
L = 3 x d for a high current
L
D
045682
C
B
045675
A
Electric diagram according to remote control type.
Wire description
5V
Cursor
Common/Earth
Switch
Ø Nozzle Flow
(mm) (Argon l/mn)
6,5 6 - 7
8 6 - 7
9,5 7 - 8
11 8 - 9
12,5 9 - 10
Pin
A
B
C
D
EN