Publicité
1. Light switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
3. Start switch "START"
1. Contacteur d'éclairage "LIGHTS"
2. Coupe-circuit du moteur "ENG. STOP"
3. Contacteur du démarreur "START"
1. Interruptor de luces "LIGHTS"
2. Interruptor de paro del motor "ENG. STOP"
3. Interruptor de arranque "START"
Engine stop switch "ENG. STOP"
Make sure that the engine stop switch is in the
"RUN" position before starting the engine. The en-
gine stop switch controls ignition and can be used
at all times to stop the engine, especially in an
emergency. The engine will not start or run when
the engine stop switch is turned to "OFF".
Start switch "START"
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
See the starting instructions on page 6-3 prior
to starting the engine.
4-7
EBU01158
EBU00647
Publicité
