Publicité
Les langues disponibles
Les langues disponibles
Emergency Recording Backup
This item lets you enable or disable automatic backup of
Emergency Recording data.
1. Move the cursor to the AUTO COPY(EMERGENCY)
parameter on the DVD menu by pressing the C or D
button
2. Select either ON or OFF by pressing the + or - but-
ton.
OFF: Disables emergency data backup.
ON: Enables emergency data backup.
The factory default setting is OFF.
Note: The following operations will be disabled by
AUTO COPY(EMERGENCY) ON.
Formatting the DVD-RAM disk
Displaying DVD-RAM disk record-
ing list
Playing
recording list
To enable the above functions, set the parameter to
OFF.
DVD Disk End Setup
This item lets you enable or disable uninterrupted storage
when the DVD-RAM disk runs out of space.
1. Move the cursor to the DVD DISKEND parameter on the
DVD menu by pressing the D or C button.
2. Select the desired mode by pressing the + or - but-
ton.
STOP: Stops storage when the disk is full.
CONTINUE: Continues storage by overwriting the old-
est data when the disk is full.
The factory default setting is STOP.
Disk Space Display
This item lets you select status display mode on the multi-
screen monitor when the remaining storage capacity is run-
ning low on the DVD-RAM disk.
1. Move the cursor to the DVD FULL parameter on the
DVD menu by pressing the C or D button.
2. Select the desired display mode by pressing the + or
- button.
back
DVD-RAM
disk
OFF: No warning for remaining space
1 - 10%: The selected warning is issued if the remain-
ing storage capacity is between 1 and 10%.
The factory default setting is 1%.
Note: This setting is valid when the DVD DISKEND is
set to STOP on the menu.
77
Publicité
