Publicité
Les langues disponibles
Les langues disponibles
3-1 PROG1(WITHOUT AUDIO)
NO START
END
G1
1
0:00
6:00 T/L
RATE
7.5
2
6:00 12:00 M/S
RATE
10
3 12:00 18:00 M/S
RATE
5
4 18:00 24:00 O/S
RATE
15
SET TOTAL REC RATE ON EACH TABLE
G1+G2+G3+G4= UNDER 60FPS
3-1 PROG1(WITH AUDIO)
NO START
END
G1
1
0:00
6:00 T/L
RATE
7.5
2
6:00 12:00 M/S
RATE
10
3 12:00 18:00 M/S
RATE
5
4 18:00 24:00 O/S
RATE
15
Note: The program number menu (with audio) displays
only the Group 1 editing area.
5. Move the cursor to the time editing area (NO. 1) by
pressing the D or C button.
6. Move the cursor to the time to start and end the record-
ing by pressing the A or B button, then select the time
by pressing the + or - button.
Notes:
• If the time (No.1) to end the recording is set to
24:00, the editing function for the timers (No. 2 to
No. 4) is disabled.
• If the time (No.1) to end the recording is set to
12:00, the time (No. 2) to start a recording cannot
be set to a time before 12:00.
• When programming a timer extended into the next
day, divide the timer event into two separate events
and program both events separately in the program
menu or other program menu.
For example,
Start
End
0:00
7:00
23:00
24:00
7. Move the cursor to the recording editing area for
groups by pressing the A or B button, then select the
recording mode for groups by pressing the + or -
button.
T/L: Time Lapse Recording
M/S: Multi Shot Recording
O/S: One Shot Recording
—: Disables Recording
Note: For further recording settings, refer to the record-
ing mode selected described later.
G2
G3
G4
T/L
T/L
T/L
7.5
1
10
-
O/S
O/S
5
1
M/S
M/S
M/S
2
2
5
M/S
-
M/S
10
10
8. Move the cursor to the editing area (NO. 2 to NO. 4) by
pressing the D or C button, then repeat the steps 6
and 7 to edit the schedule.
9. When
all
settings
SETUP/ESC button to return to the previous TIMER
REC SETUP menu.
Special Day Timer
Before programming this table, confirm that the Program
Timer is programmed completely.
This table allows for up to 30 days to be defined as special
days.
In this table, 30 specific user defined days are assigned to
one day of the week.
1. Move the cursor to TIMER SPECIAL DAY in the TIMER
REC SETUP menu by pressing the D or C button, then
press the SET button.
The TIMER SPECIAL DAY SETUP table as shown below
appears on the monitor screen.
3-5 TIMER SPECIAL DAY SETUP
DATE
ACT
1 JUL 4 SUN 11 ----- --- 21 ----- ---
2 ----- --- 12 ----- --- 22 ----- ---
3 ----- --- 13 ----- --- 23 ----- ---
4 ----- --- 14 ----- --- 24 ----- ---
5 ----- --- 15 ----- --- 25 ----- ---
6 ----- --- 16 ----- --- 26 ----- ---
7 ----- --- 17 ----- --- 27 ----- ---
8 ----- --- 18 ----- --- 28 ----- ---
9 ----- --- 19 ----- --- 29 ----- ---
10 ----- --- 20 ----- --- 30 ----- ---
2. Move the cursor to the DATE editing area by pressing
the D or C button.
3. Select a month by pressing the + or - button.
Move the cursor to the right by pressing the B button,
then select the date by pressing the + or - button.
Note: The programmed month and date will be valid for
every year.
4. Move the cursor to the ACT editing area by pressing
the B button, then select the day of the week by press-
ing the + or - button.
5. Repeat the above steps 2 to 4 to program the other
special days.
6. When satisfied with all special days, press the
SETUP/ESC button to return to the previous TIMER
REC SETUP menu.
Note: To release the programmed special day timer, select
"---" in the ACT column.
are
completed,
press
DATE
ACT
DATE
ACT
the
51
Publicité
