Bosch HDS8055C Manuel D'utilisation page 9

IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Verify the anti-tip device has been properly installed
▶
and engaged.
▶ Engage the range to the anti-tip device. Ensure the
anti-tip device is re-engaged when the range is moved.
▶ Re-engage the anti-tip device if the range is moved. Do
not operate the range without the anti-tip device in
place and engaged.
See installation instructions for details.
▶
Failure to follow the instructions in this manual can
▶
result in death or serious burns to children and adults.
Check for proper installation and use of the anti-tip
▶
bracket. Carefully tip the range forward pulling from the
back to ensure that the anti-tip bracket engages the
range leg and prevents tip-over. The range should not
move more than 1" (2.5 cm).
WARNING
In the event of a malfunction, it might become necessary
to turn off the power supply.
▶ Have the installer show you the circuit breaker or fuse.
Mark it for easy reference.
To avoid electrical shock hazard, before servicing the
appliance, turn power off at the service panel and lock the
panel to prevent the power from being switched on
accidentally.
Proper Installation - Improper installation or grounding can
cause electric shock.
This appliance must be properly installed and grounded
▶
by a qualified technician.
Connect only to properly grounded outlet.
▶
Refer to installation instructions for details.
▶
User Servicing - Do not repair or replace any part of the
appliance unless specifically recommended in this
manual.
All other servicing should be referred to an authorized
▶
service provider.
Light socket is live when door is open if main power
supply is not turned off.
Turn off main power supply at the service panel before
▶
changing the light bulbs.
WARNING
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
The lenses are made of glass. Handle carefully to avoid
▶
breaking. Broken glass can cause an injury.
Failure to follow these instructions when removing the
oven door may lead to personal injury or product damage.
Make sure oven is cool and power to the oven has
▶
been turned off before removing the door. Failure to do
so could result in electrical shock or burns.
▶ The oven door is heavy and parts of it are fragile. Use
both hands to remove the oven door.
The door front is glass. Handle it carefully to avoid
▶
breakage.
Grasp only the side of the oven door. Do not grasp the
▶
handle. It may swing in your hand and cause damage
or injury. Failure to grasp the oven door firmly and
properly could result in personal injury or product
damage.
To avoid injury from hinge bracket snapping closed, be
▶
sure both levers are securely in place before removing
the door.
▶ Do not force the door open or closed. The hinge could
be damaged and cause damage or injury.
Do not lay the removed door on sharp or pointed
▶
objects as this could break the glass. Lay it on a flat,
smooth surface, positioned so that the door cannot fall
over.
WARNING
Grease and fat can ignite when heated.
▶ Keep the oven free from grease build up.
CAUTION
In the event of an error the display flashes and beeps
continuously.
▶ Disconnect appliance from the power supply and call
an authorized service provider.
WARNING
Malfunctions can cause injuries.
Do not operate this appliance if it is not working
▶
properly, or if it has been damaged. Contact an
authorized service provider.
1.10 Conversion to Liquified Petroleum
gas
WARNING
Personal injury or death from electrical shock may occur,
if the range is not installed by a qualified installer or
electrician. Any additions, changes, or conversions
en-us
9