Bosch HDS8055C Manuel D'utilisation page 10

en-us
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
required in order for this appliance to satisfactorily meet
the application needs must be made by a qualified
technician.
Your gas range model is designed to allow for LP
conversion by a qualified service technician.
Before installing the kit, be sure to follow the LP
▶
Installation Instructions carefully.
10
1.11 High altitude installation
This appliance has been tested for operation up to an
altitude of 10,000 ft (3,048 m) elevation above sea level.
If desired, for altitudes above 2,000 ft (610 m) elevation
above sea level, adjustments may be made. Burners
should be checked at the lowest setting, if the flame is not
stable the simmer should be increased until the flame is
stable. This can be done by adjusting the bypass screw in
the valve. If flame performance is satisfactory, adjustment
will not be required. It is required that a Certified
Professional make the high altitude adjustments during
installation. High altitude nozzle sets for natural gas and
propane gas are available for installations at
2,000-6,500 ft (610-1,981 m) or 6,501-10,000 ft
(1,982-3,048 m) if the adjustments using the bypass
screw don't resolve performance issues.
1.12 State of California Proposition 65
Warnings
This product may contain a chemical known to the State
of California, which can cause cancer or reproductive
harm. Therefore, the packaging of your product may bear
the following label as required by California: