Panasonic WX-SR202P Mode D'emploi page 56

Troubleshooting
Please check the common problems listed in this table before seeking professional
help.
If none of the tips provided here help, if you are dealing with a problem not listed here, or if
you are otherwise uncertain, contact your retailer for more information.
Phenomenon
The product does not
turn ON
No audio is being
output
I cannot pair
microphones
56
Cause/measure
⿟ Is the power plug properly inserted into a power
outlet?
¨ Make sure that it is properly connected.
¨
⿟ Is the LAN cable (page 22) properly plugged
in?
¨ Connect the cable to a wireless antenna
¨
connector
⿟ Is the output cable properly connected to the
output device?
¨ Connect the output cable to the output
¨
device.
⿟ Is the [POWER] switch set to ON?
¨ Set the [POWER] switch to the ON position.
¨
⿟ Is the [VOL] adjustment knob set to a value
higher than [0]?
¨ Adjust the volume with the dedicated knob.
¨
⿟ Is the LAN cable properly inserted?
¨ Connect the cable to a wireless antenna
¨
connector.
⿟ Are there other microphones in use?
¨ Stop using the other microphones before
¨
pairing a new one.
⿟ Are the batteries in the microphone exhausted?
¨ If they are, replace them (if they are non-
¨
rechargeable, alkaline batteries) or charge
them (if they are rechargeable batteries)
before pairing.
Reference
page
19, 25,
27
19, 25,
27
19, 27
15, 48
17, 48
19, 25,
27
45, 47
44