Panasonic WX-SR202P Mode D'emploi page 30

Installing antennas
■ Before you start
This section describes some considerations regarding the placement and installation of
antennas. Refer to the wireless antenna (WX-SA250P) manual for practical installation
instructions.
■ Antenna wireless output level and placement
Antenna wireless output level (antenna field selection)
⿟ The wireless output level of the antenna (antenna field selection) is set depending on the
dimensions and structure of the building inside which the antenna is going to be placed.
The antenna field selection is performed after installing the antenna, either by the
receiver or by the configuration/maintenance PC. See page 36 for details.
Antenna field selection Average wireless reach (microphone-coverage area of the antenna)
Small
Medium
Large
Max*
* Can only be set by a PC installed the support software
Antenna field selection
Less than
10 m (33 ft)
Coverage area of "Small"
Coverage area of "Large"
30
Radius about 8 m (26 ft)
Radius about 15 m (49 ft) (factory default)
Radius about 30 m (99 ft)
Radius about 40 m (131 ft)
Less than
10 m (33 ft)
Approx.
8 m (26 ft)
Less than
40 m (131 ft)
Less
than
40 m
Approx.
(131 ft)
30 m (99 ft)
Less than
20 m (66 ft)
Less
Approx.
than
20 m 15 m
(66 ft) (49 ft)
Coverage area of "Medium"