Panasonic WX-SR202P Mode D'emploi page 25

Connections
■ Connecting with antennas
Up to 8 wireless antennas can be connected at once.
The antenna connected to the [ANTENNA 1] connector will be used as the reference
antenna for wireless synchronization. Always connect a reference antenna when choosing
either "main system" or "sub-system" as the wireless synchronization setting (page 38).
1
Connect the "Wireless antenna connector" on the receiver to the
"Wireless receiver connector" on the antenna via a LAN cable (page
22)
Antenna 8
Receiver
Wireless antenna connectors 1 to 8
⿟ The wireless antenna connectors for this product are the proprietary
Important type.
Do not connect any PoE devices (hubs or routers equipped with PoE).
Doing so may cause malfunctions.
⿟ Use a straight (non-crossover) LAN cable for the connection. Using a
Important
crossover LAN cable may cause the antenna to malfunction.
⿟ A reference antenna (connected to [ANTENNA 1]) is necessary when the
system is set as either main system or sub-system.
⿟ Use a LAN cable shorter than 200 m (656 ft).
LAN cable
Antenna 2 Antenna 1
Wireless receiver
connector
(inside the
connector cover)
To AC120 V
60 Hz
electric outlet
25