Panasonic WX-SR202P Mode D'emploi page 27

■ Connecting audio output
The receiver can output the audio from the microphones on each channel or the collective
mixed audio from all channels to an amplifier (or mixer).
Connect an external device such as an amplifier to the [CH OUT] or [MIX OUT] connector
on the receiver.
1
Connect the wires to the included Euroblock connectors
Connect the cables to the included 6-pin Euroblock connectors to the [CH OUT] or
[MIX OUT] connectors on the receiver. The [CH OUT] connector can output the audio
from two channels through a single Euroblock connector.
Antenna 8
Wireless receiver
connector
(inside the
connector cover)
Wireless antenna
connectors 1 to 8
Important
⿟ Thoroughly connect the Euroblock connector to the receiver.
⿟ When connecting amplifiers (or mixers) to individual channels, use the [CH
OUT] connectors on the receiver.
⿟ When connecting amplifiers (or mixers) to the mixed output of all channels,
use the [MIX OUT] connectors on the receiver.
Antenna 2
LAN cable
Channel output
connectors 1 to 4
Antenna 1
Receiver
MIX output connector
To an amplifier or mixer
To AC120 V
60 Hz
electric outlet
27