Panasonic WX-SR202P Mode D'emploi page 26

Connections
■ Connecting the Euroblock connectors
The audio input and output connectors of the receiver use removable Euroblock connectors.
1
Connecting wires to the included Euroblock connectors
Use a flat-head screwdriver to loosen the screws on the Euroblock connector. Remove
a piece of coating from the wire to expose the conductor. Twist the conductor and
insert it into the Euroblock connector. Finally, tighten the screws on the Euroblock
connector.
7 mm±1 mm
(1/4 inches ± 1/16 inches)
Important
Cable specifics
⿟ Recommended cable: AWG 16 to 28 (do not use soldered cables)
⿟ Length of the coating to be removed: 7 mm ± 1 mm (1/4 inches ± 1/16
inches)
⿟ Screw diameter: 2 mm (1/16 inches)
⿟ Make sure that the wires are securely connected.
26