Publicité
Les langues disponibles
Les langues disponibles
Settings
■ Antenna field selection
Set the wireless output level of the antennas through the configuration switches No.1 and
No.2, or alternatively set it individually by the configuration/maintenance PC. Choose the
most suitable wireless output level of the antenna (antenna field selection) according to the
usage environment.
Changing the antenna field selection to "Small / Medium / Large" will apply that setting to
all antennas connected to the receiver.
To change the settings for individual antennas, set the switch to [Individual setting] and
configure the field selection through a PC installed the support software.
Receiver
Configuration switches
Configuration
switches numbers
No.1
No.2
OFF
OFF
OFF
ON
ON
OFF
ON
ON
* These are the average ranges for antenna-microphone wireless coverage and intra-
antenna coverage between reference antennas for wireless synchronization. See
"Wireless synchronization settings" (page 38) for details.
Changes in the configuration switches are applied during the start-up of
Important
the receiver. If you have performed any changes while the receiver was
ON, turn the power switch OFF and ON again to restart the product.
36
Average wireless reach
Antenna field
(microphone-coverage
selection
area of the antenna)
Small
Radius about 8 m (26 ft)
Medium
Radius about 15 m (49 ft) Radius about 40 m (131 ft)
(factory default)
Large
Radius about 30 m (99 ft) Radius about 60 m (196 ft)
Individual
-
setting
* The switch cover is removed in this illustration
Average main system
reference antenna wireless
*
reach (coverage area)
Radius about 30 m (99 ft)
-
Publicité
