Panasonic WX-SR202P Mode D'emploi page 15

Parts and their names
Front
① ② ③ ④
① Power switch [POWER]
Turns the receiver ON/OFF.
② Power indication (green)
Lights on as the receiver is turned ON. Goes off as the receiver is turned OFF.
③ Switch cover
Loosen the screw and remove the switch cover to gain access to the switches for
adjusting the receiver (④), the connector (⑤), and the indicators (⑥). Keep the switch
cover closed unless needed.
④ Configuration switches (behind switch cover)
Used to change various settings for the receiver.
Configuration switch No.1 and No.2: antenna field selection (page 36)
Configuration switch No.3 and No.4: wireless synchronization settings (page 38)
Configuration switch No.5: microphone battery settings (page 42)
Configuration switch No.6: microphone audio settings (page 43)
Configuration switch No.7 and No.8: unused
Changes in the settings performed while the receiver is turned ON will not be reflected. If
you have performed any changes while the receiver was ON, turn the power switch OFF
and ON again to restart the product.
⑤ Connector for configuration and maintenance [SET] (behind switch cover)
A micro USB 2.0 type B port to connect the receiver to a microphone.
Use a USB 2.0 cable (micro type B male to type A male; locally procured) and a
conversion cable (type A female to micro type B male; locally procured) to connect with a
microphone.
* Use a USB host (OTG) cable as conversion cable.
⑤ ⑥ ⑦ ⑧ ⑩
⑨
* The switch cover is removed in
⑪ ⑬
this illustration
⑫ ⑭ ⑮
15