Publicité
Les langues disponibles
Les langues disponibles
⑩ Reception level indicator [RF LEVEL]
Shows the reception level of the microphone RE signal on each channel in five
increments. Installing the wireless antenna and selecting the antenna field in such a way
that the microphone always shows at least three green lines (level 3) within its usage
area will ensure stable operation.
On (5 green lines): Level 5 (Max.)
On (4 green lines): Level 4
On (3 green lines): Level 3
On (2 green lines): Level 2
On (1 green line):
On (1 to 5 red lines): Reception error
All indicators off:
⑪ Audio level indicator / mute status indicator [AUDIO/MUTE]
Shows the audio level of the signal from the microphones on each channel.
On (red):
On (orange):
On (green):
Slow blinking (red): Muted (when this device is being controlled remotely)
Quick blinking (red): Volume adjustment knob cannot be operated (when this device
Off:
If the volume adjustment knob is operated in the external remote state, the volume
level indicator blinks quickly (red) and volume adjustment is not possible.
⑫ Volume adjustment knob [VOL 0, 10]
Adjusts the volume of the microphones on each channel.
⑬ Microphone remaining battery indicator [MIC BATT]
Changes color (green/orange/red) depending on the residual battery level of the
microphones on each channel. See "Confirm the remaining battery level of the
microphone" (page 50) for details.
The external remote state can be forcibly canceled by keeping the [REG] buttons of CH1
and CH2 pressed simultaneously for more than two seconds while the receiver is
powered ON.
Level 1 (Min.)
No paired microphone, or no signal from the paired microphone
Peak
Close to peak
Audio is being received
is being controlled remotely)
No audio
17
Publicité
