Kessel Aqualift S XL Directives Pour La Pose, Le Service Et La Maintenance page 50

4.3 Installing the level detection
Level sensor
• Pull safety cap from pressure diaphraghm.
• Make sure that the distance <L> between the blind
plug <3> and the sensor tip <4> is 630 mm
• Insert the level sensor <1> into the retainer tube <2>
as far as it will go
Illustration <13> shows pumping station with cast iron fitting
010-992
All manuals and user guides at all-guides.com
Installation
50 / 208
Ill. [12]
3
L
1
4
Ill. [13]
2
2018/07