Publicité
ACCESSORIES DISASSEMBLY
BACKING PAD
Unscrew pad's (9) mounting screw using the wrench (4).
POLISHING FOAM
Remove the polishing foam used and apply the new one with
pressing on the backing pad.
ALLOWED ACCESSORIES
LHR 12E: polishing foam Ø 130-150 mm for backing pad Ø 125 mm.
LHR 75E: polishing foam Ø 80-100 mm for backing pad Ø 75 mm.
NOISE EMISSION VALUES
Detected noise emission values comply with the following
directives:
EN 60745-1
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
UNCERTAINTY
Use ear protection!
VIBRATION EMESSION VALUES
Detected vibration emission values comply with the following
directives:
EN 60745-1
3 AXIS VIBRATION LEVEL
UNCERTAINTY
Displayed emission values are comparative and are to be
employed for a provisional assessment of the operator's risk
exposure during the work period. Appropriate evaluation of
work period must also include tool's idle and stop periods.
These emission values represent the tool's main applications.
If the tool is used for other applications, with other accessories,
or if it does not undergo regular maintenance, emission values
can significantly increase during operations.
Danger! The indicate measurements refer to new power
tools. Daily usa causes the noise and vibration values
to change.
LHR 12E
dB(A)
79
dB(A)
90
K
3
LHR 12E
m/s
2.7
2
K
0.5
MAINTENANCE
All maintenance operations are carried out with the power
supply disconnected.
At the end of each work session, or when required, remove any
dust from the body of the tool using a jet of compressed air,
paying particular attention to the motor ventilation slots.
No other maintenance operations must be undertaken by
the user.
Maintenance and cleaning of the inner parts, like brushes, ball
bearings, gears etc. or others, must be carried out only by an
authorized customer-service workshop.
DISPOSAL (WEEE DIRECTIVE)
At the end of its useful life, the product, pursuant to
European Directive 2002/96/CE (WEEE) + 2003/108/
CE and its implementation in national law, must not be released
into the environment or thrown away as domestic waste, but
LHR 75E
must be disposed of at authorised recycling centres (contact
79
the relevant local authorities for a list of places where the
90
product may be disposed of according to the law). Disposing
3
of the product correctly contributes to protecting human health
and safeguarding the environment.
Any illegitimate disposal of the product will be punishable by
law.
CONFORMITY DECLARATION
We declare on our responsibility that the represented tool is in
conformity with the Essential Requirements of Safety of the
following Directives:
2006/42/CE, 2006/95/CE, 2004/108/CE, 2011/65/CE.
LHR 75E
The tests have been carried out in accordance with the
2.5
European Harmonised Standar
0.5
EN 60745-1: 2010, EN 60745-2-4: 2009 + A11: 2011;
EN 55014-1: 2006 + A1: 2009 + A2: 2011;
EN 55014-2: 1997 + A1: 2001 + A2: 2008;
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009;
EN 61000-3-3: 2008;
EN 62233: 2008.
THE PRESIDENT
G. Valentini
Technical file at:
RUPES SpA
Via Marconi, 3A - Loc. Vermezzo
20080 VERMEZZO CON ZELO (MI) Italy
S.p.A
Vermezzo con Zelo (MI), 15/10/2013
7
Publicité
