Publicité
Les langues disponibles
Les langues disponibles
54
Removing the shelf holders
Your appliance is equipped with shelf re-
tainers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
Door reversibility
Warning! Before carrying out any
operations, remove the plug from the
power socket.
Important! To carry out the following
operations, we suggest that this be made
with another person that will keep a firm
hold on the doors of the appliance during
the operations.
To change the opening direction of the
door, do these steps:
1. Open the doors. Unscrew the middle
hinge (m2). Remove the plastic spacer
(m1).
m1
m5
m3
2. Remove the doors.
3. Remove the spacer (m6) and move to
the other side of the hinge pivot (m5).
4. Unscrew the lower hinge (b1)
5. Remove the left-hand cover pins (b4)
and move to the other side.
6. Re-screw the lower hinge (b1) on the
opposite side.
7. Unscrew the lower hinge pivot (b2) and
the spacer (b3) and place them on the
opposite side.
8. Remove the stoppers (1) and move to
the other side of the doors.
m2
m6
m4
Publicité
