Barbecook BILLY Mode D'emploi page 7

7.4 Maintaining stainless steel, chrome
and powder coated parts
The appliance is composed of stainless steel, chrome and
powder coated parts. Each material has to be maintained
differently:
Material How to maintain this material
Do not use aggressive, abrasive or metal
Stainless steel •
detergents.
and chrome
Use soft detergents and let them act on the
•
steel.
Use a soft sponge or cloth.
•
Rinse thoroughly after cleaning and dry well
•
before storing.
Do not use sharp objects. Use soft detergents
Powder •
and a soft sponge or cloth.
coated
Rinse thoroughly after cleaning and dry well
•
before storing.
To prevent formation of rust on stainless steel, avoid
1
contact with chlorine, salt and iron. We recommend not
using the appliance near the coast, near railways or near
swimming pools.
Damages caused by not following these instructions are
1
regarded as inadequate maintenance and are not
covered by the warranty.
Below the exploded view of your appliance (second part of the
manual), you find a list with all parts of which the appliance is
composed. This list includes a symbol that specifies the material
of each part, so you can use it to check how you have to maintain
a particular part. The parts list uses the following symbols:
Symbol
Stainless steel
Chrome
Powder coated
7.5 Ordering spare parts
Parts that are directly exposed to fire or intense heat have to be
replaced from time to time. To order a spare part:
Look up the reference number of the part you need. You find
1
a list of all reference numbers below the exploded views in
the second part of this manual and on www.barbecook.com.
If you registered your appliance online, you will
2
automatically be guided to the correct list.
Order the spare part at your point of sale. You can order
2
parts both under and outside warranty.
8 WARRANTY
8.1 Covered
Your appliance comes with a warranty of two years, starting from
the date of purchase. This warranty covers all manufacturing
defects, provided that:
You used, assembled and maintained your appliance
•
according to the instructions in this manual. Damages
caused by misuse, incorrect assembly or inadequate
maintenance are not regarded as manufacturing defects.
All manuals and user guides at all-guides.com
Material
www.barbecook.com
You can present the receipt and the unique serial number of
•
your appliance. This serial number starts with a letter,
followed by 15 digits. You can find this number:
On this manual.
-
On the packaging of the appliance.
-
On the inside of a foot of the appliance.
-
The Barbecook quality department confirms that the parts
•
are defective and that they proved defective under normal
use, correct assembly and adequate maintenance.
If one of the above conditions is not met, you cannot claim any
form of contribution. In all cases, the warranty is limited to the
repair or replacement of the defective part(s).
8.2 Not covered
The following damages and defects are not covered by the
warranty:
Normal wear and tear (rusting, distortion, discolouration...) of
•
parts that are directly exposed to fire or intense heat. It is
normal to replace these parts from time to time.
Visual irregularities that are inherent to the manufacturing
•
process. These irregularities are not regarded as
manufacturing defects.
All damages caused by inadequate maintenance, incorrect
•
storage, improper assembly or modifications made to
pre-assembled parts.
All consequential damages caused by careless or
•
non-compliant use of the appliance.
Rust or discolouration caused by external influences, the use
•
of aggressive detergents, exposure to chlorine... These
damages are not regarded as manufacturing defects.
7