Trix Kof II Mode D'emploi page 6

G Trouble-free programming of the decoder can only
be guaranteed when it is done with original Trix
Selectrix components.
G The train has a technical feature in DCC operation
in which its lights will go on when the lighting
function is turned off and the train is stopped in
a block.
G When using a multiprotocol digital central unit as
an operating system, this locomotive should be
controlled with DCC format. The Selectrix digital
central unit allows Selectrix format to be employed.
The maintenance work necessary after normal
operation of this locomotive is described below.
It is not necessary to open the locomotive for service
work. The manufacturer warranty is automatically
canceled if the locomotive is disassembled.
Please see your authorized Trix dealer for repairs
or spare parts.
In principle the pulling power for this model is limited.
The maximum grade it can negotiate with 2 to 3 two-
axle freight cars is about 3 %.
6
All manuals and user guides at all-guides.com
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Trix have been installed in Trix products
or where Trix products have been converted in such
a way that the non-Trix parts or the conversion were
causal to the defects and / or damage arising. The
burden of presenting evidence and the burden of
proof thereof, that the installation of non-Trix parts or
the conversion in or of Trix products was not causal
to the defects and / or damage arising, is borne by
the person and/or company responsible for the
installation and / or conversion, or by the customer.
Safety Warnings
G
G
G
This locomotive is to be used only with an operating
system designed for it.
This locomotive must never be supplied with
power from more than one transformer.
Pay close attention to the safety warnings in the
instructions for your operating system.