Displaying Measurement Results; Main Settings; Selecting Parameters To View, And Setting Tolerance Values - Hexagon TESA RUGOSURF 10G Mode D'emploi

Displaying measurement results

16
To access this menu option, select Visualization, and then validate through ENTER
This option lets you visualize each screen in turn, starting from the one you've previously enabled
under Visualization Settings.
1 – Parameter screen image
2 – Graphic screen image (shows graphs)
3 – Abbott curve screen image

Main settings

17
To access this sub-menu, select Settings, and then validate through the ENTER key.

Selecting parameters to view, and setting tolerance values

17.1
To access this menu option, select
Use this key to choose :
- Enable allPress ENTER
- Disable allPress ENTER
- Next page Press ENTER
- Param. Ra Press ENTER
6999.006.1503
(shows the values based on used standard and chosen parameters)
(shows the bearing portion of the profile)
Params Settings, and then validate by pressing ENTER
to enable all parameters.
to disable all parameters, except for Ra.
to jump to next page.
to enable/disable this parameter only.
Page 13/22
.
A. Mathier / March 15