Cut-Off Length In Inch; Choosing The Number Of Cut-Offs; Setting The Traverse Length As Per Iso 12085 (Cnomo) - Hexagon TESA RUGOSURF 10G Mode D'emploi

Cut-off length in inch

10.1

Choosing the number of cut-offs

11
To access this menu option, select
Cut-off No = 5

Setting the traverse length as per ISO 12085 (CNOMO)

12
Once you have chosen the ISO 12085 standard, the length of the measuring range, which does no
longer depend on the cut-off value, is directly selected.
To access this menu option, select
Traverse l. = 1,5 mm
6999.006.1503
Cut-off No. and then validate through the ENTER key
Cut-off No. = 10
Traverse length, and then validate through ENTER
Traverse l. = 12 mm
Page 10/22
.
.
A. Mathier / March 15