Miele CS 1011 Instructions page 11

Changing the jets
^ Remove the burner grates, burner
cap n and the burner head o.
^ Using a 7 mm nut driver or socket
wrench to unscrew the jet, s.
^ Install the new jet using the same
procedure.
All manuals and user guides at all-guides.com
Converting CS 1012
Changing the needle valves
The combiset surface has to be
removed before the needle valves can
be changed.
^ Remove the grates, burner cap n
and burner head o.
^ Pull off the control knob.
^ Loosen the screws t.
^ The combiset surface can now be
removed.
^ Use a small screwdriver to unscrew
the needle valves u and remove with
a pair of needle nose pliers.
^ Insert the new valves and tighten.
^ Use sealant to secure the jets and
prevent loosening.
,
Check all fittings for gas leaks
before reassembling the cooktop.
11