Use; First Use; Activating (Only For Electrically Adjustable Versions); Working With The Marina - lopital Marina 6100 Mode D'emploi

2. Use

2.1. First use

Before you use the Marina, you must check to ensure the components on page 32 are
present. These components can be replaced by authorised individuals in the event of
damage.
These components are the applied parts of the Marina. These components may come into
contact with the user(s) while the Marina is in use.
2.2. Activating
(Only for electrically adjustable versions).
The Marina must be activated before use, which can be done by pressing any button on
the manual control for 2 seconds (See figure 1).

2.3. Working with the Marina

Step 1
Disconnect the Marina from the charger if necessary.
Step 2
Activate the Marina (See paragraph 2.2. Activating).
Step 3
Always apply the brake on the Marina when transferring clients (See paragraph 3.1.
Wheel blocking).
Transfer from bed
Step 4
Place the Marina alongside the bed with the head-end aligned with the head-side of the
client.
Step 5
Lower the side rails of the Marina (See paragraph 3.2. Side rails).
Step 6
Move the bed base on the Marina to just above the bed mattress and collapse the side
rails downwards.
Marina Shower stretcher | Instructions for use | 33