Pulsar PROTON FXQ30 Guide De Démarrage Rapide page 6

Charging battery pack
The PROTON FXQ30 thermal imaging attachment
comes with an APS 5 rechargeable Lithium-ion
battery. APS 5 batteries support USB Power Delivery
fast charging technology when using a standard
charging set (charger, USB Type-C cable, power
adapter). Before first use, make sure the battery is
fully charged.
Option 1
•
Install the APS 5 battery (4) in the battery
compartment (5) of the device.
•
Connect the USB cable (21) to the USB Type-C
connector (9) of the device.
•
Connect the other end of the USB cable (21) to the
Power Adapter (22).
•
Plug the Power Adapter (22) into a 100-240 V
socket (23).
Option 2
•
Insert the APS 5 battery (4) along the guide into
the APS 5 charger* (18) slot as far as it will go (see
Fig.).
•
Connect the plug of the USB Type-C cable (21) to the
USB Type-C connector of the Power Adapter (20).
•
Plug the Power Adapter (22) into a 100-240 V socket
(23).
•
Connect the other end of the USB Type-C cable
(21) to the USB Type-C connector (20) of the
charger.
•
LED indicators (19) will display
the battery charge level (see
Table).
Note: Two* batteries can be
charged at the same time,
a second slot is provided
for it.
* Sold separately.
3
ENGLISH
4
4 18
9
21
22
23
23
22
21
19
20