Publicité
Les langues disponibles
Les langues disponibles
ALL-SEASON ATV TRACK KIT
KIT PN 2876664
3.3. Track Tension Adjustments
As specified earlier in this manual, the track is going to
stretch during your first ride and to prevent premature
wear of components or failure that a loose track may
cause, here is the way to adjust track tension. The
following steps refer to one track. However, all of the
tracks follow the same procedure for tension adjustments.
Please note : Some parts had been hidden in following
figures for a better understanding.
1. Align the track adjustment hole with the 1/2"
adjustment bolt of the track adjuster.
Figure 15 - Alignment of the track adjustment hole
2. Loosen the 3/8" nc nut retaining the track adjuster
to the structure.
Figure 16 - Nut of the track adjuster
3. Loosen the 1/2" jam nut (A) of the adjustment bolt
on the track adjuster using the track tension
adjustment tool (B).
2510266
A-2510266 Rév. A
Figure 17 - Track tension adjustment tool
4. Adjust track tension by screwing or unscrewing
adjustment bolt until you get displacement.
Rear right
shown
Figure 18 - Adjusting the track tension
5. Tighten bolts, nuts and jam nut which were
loosened in steps 2 and 3.
WARNING
Do not overtighten the track, a performance loss or
component damage may occur.
- 17 -
Front right
shown
Publicité
