Publicité
G.
1
H.
1
I.
J.
Replace washers (1) on end valves and spout adapter. Replace nest (2) on hand
I.
spray support assembly. Rotate 90° to expose screws (3).
Tighten screws (1) with a regular slotted screwdriver. Tighten until washers (2)
J.
and nest (3) are flush to the finished deck surface. NOTE: Gradually tighten all
six screws (1), for the two end valves and spout adapter, together to prevent
binding. You are now ready for the trim kit. Please see the trim installation instructions.
Publicité
