Reset Factory Setting (Reset); Reset Model Memory (Model Reset); Timer - XciteRC 3i LCD FHSS Pro-Spec Mode D'emploi

Reset factory setting (RESET)

All the setting in the system will be reset to the default values by this reset
function. It takes about 30 seconds.
EN
1. Press "ENTER" to see FUNCTION MENU.
2. Use the +/- Keys to select the RESET function and press ENTER.
3. Press ENTER to reset the XRC-3i memory.
4. Press "EXIT" twice to save and return to FUNCTION MENU, press EXIT
again to return to the Main Screen.

Reset Model memory (MODEL RESET)

This function will reset the data of the current model memory to default values.
1. Press "ENTER" to see FUNCTION MENU.
2. Use the +/- Keys to select the M_RES function and press ENTER.
3. Use the +/- Keys to select YES.
4. Press ENTER to reset the data
5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to return to the Main
Screen.

TIMER

Use the timer by selecting one of the two timers UP TIMER and DOWN TIMER, and if the MODE is INH, It
will close the TIMER Function.
1. Press "ENTER" to see FUNCTION MENU
2. Use the +/- Keys to select the TIMER function and press "ENTER".
3. Press ENTER to select a item.
4. Use the +/- Keys to change the value
5. Press "EXIT" twice to save and return to FUNCTION MENU, press "EXIT" again to return to the Main
Screen.
Up timer function
• Press "ENTER" to select the MODE. Use +/- Keys to select UP_T. (UP TIMER).
• The UP TIMER can be used to count the time from 0 minute 0 second to the stop time. The
stop time is set form from 0 minute 0 second to 99 minute 30 second.
• The first start operation will be linked to the throttle trigger.
• The passage of time is announced by sounding of a buzzer each minute after starting.
• The buzzer will sound ‚B-B-B...' when the timer is up to the stop time.
Down timer function
• Press "ENTER" to select the MODE. Use +/- Keys to select DN_T.(DOWN TIMER).
• The DOWN TIMER can be used to count the time from preset time 0 minute 0 second. The
preset time is set form 0 minute 0 second to 99 minute 30 second.
• The first start operation will be linked to the throttle trigger.
34
Operation
XciteRC 3i LCD FHSS Pro-Spec 2.4 GHz