Automatic Start (Ats); Brake Mix (Bk-Mix) - XciteRC 3i LCD FHSS Pro-Spec Mode D'emploi

Operation
2. Press Enter to select SPD. FL item.
3. Use +/- Keys change the value.
4. Press exit twice return to the function menu.
TERMS:
SPD.FL- SPEED FORWARD DELAY.
SPD.BK- SPEED BACKWARD DELAY.

Automatic Start (ATS)

When the throttle trigger is set to full throttle simultaneously with starting when the track is slippery, the car
wheels will spin and the car will not accelerate smoothly. When the Start function is activated, merely opera-
ting the throttle trigger slowly causes the throttle servo to automatically switch from the set throttle position to
a preset point so that the tires do no loose their grip and the car accelerates smoothly.
• When the throttle trigger is moved to the preset trigger position (TRI), the throttle servo moves to the
preset position (POS).
• When the throttle trigger is operated slowly so that the wheels will not spin, the car automatically acce-
lerates to the set speed.
• This function is effective only for the first throttle trigger operation at starting. This function has to be
activated before every start.
• When the throttle trigger is returned slightly, the Start function is automatically deactivated and the set
returns to normal throttle trigger operation.
1. Press "ENTER" to see FUNCTION MENU
2. Use the +/- Keys to select the ATS function and press ENTER.
3. Press ENTER to select TRI (Throttle Trigger) item. Use +/- to change the value. Range: - 100% ~ +100%..
4. Press ENTER to select POS (Preset Position) item. Use +/- to change the value. Range: 0% - 100%.
5. Press ENTER to select DLY (ATS delay time) item. Use +/- to change the value. Range: 0 - 100.
6. Press ENTER to select MOD (ATS Ready setting) item. Use +/- to change INH or RDY.
7. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to return to the Main Screen.
without ATS

Brake MIX (BK-MIX)

When using a secondary brake system set the BRAKE MIX value to a percentage of the Throttle Brake. This
mixing uses the 2nd channel to control the rear brakes and the 3rd channel to control the front
brakes. This function can be used in conjunction with the TH TRIM and TH EPA to fine tune the power and
balance of the overall braking system.
1. Press "ENTER" to see FUNCTION MENU
2. Use the +/- Keys to select the BR_MIX function and press ENTER.
3. Press ENTER to select a item.
4. Use the +/- Key to change the value.
5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to return to the Main
Screen.
TERMS:
RATE: the rate of brake between 3rd channel and 2nd channel. Default value: 0 -120%.
EN: the start or close switch of this function. Select "ON" to start the function, and "OFF" to close the
function.
XciteRC 3i LCD FHSS Pro-Spec 2.4 GHz
Range: 0 - 100%, default:0
Range: 0 - 100%, default:0
with ATS
EN
31