Servo Speed (Spd) - XciteRC 3i LCD FHSS Pro-Spec Mode D'emploi

2. Press "ENTER" to enter copy mode ,Press "+" or "-"to choose "Mod01....Mod15"
3. Press "ENTER"to save your setting and Press "EXIT"leave CPY interface, and back to the function
menu interface.
EN

Servo Speed (SPD)

This function include tow items: STEERING SPEED and THROTTLE SPEED.
1. Press "ENTER" to see FUNCTION MENU
2. Use the +/- Keys to select the SPEED function and press ENTER.
3. Press ENTER to select a setting.
4. Use the +/- Key to change the value.
5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to return to the Main Screen.
Steering Speed
Understeer
not activated
Quick steering operation will cause momentary under steering, loss of speed, or spinning. This function
is effective in such cases. This function limits the maximum speed of the steering servo. (Delay function)
• The steering speed when the steering wheel is operated (TURN direction) and returned (RETN direc-
tion) can be independently set.
• If the steering wheel is turned slower than the set speed, the steering servo is not affected.
Throttle Speed
Sudden throttle trigger operation on a slippery road only causes the wheels to spin and the vehicle cannot
accelerate smoothly. Setting the throttle speed function reduces wasteful battery consumption while at the
same time permitting smooth, enjoyable operation.
Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if the throttle trigger is
operated more than necessary. This delay function is not performed when the throttle trigger is returned and
at brake operation.
Adjustment:
1. Select the TH button by +/- Keys.
30
Oversteer
without TH.Speed
Racing line
activated
SPD.FL DELAY
with TH.Speed
Operation
SPD.BK DELAY
XciteRC 3i LCD FHSS Pro-Spec 2.4 GHz