Desoutter EID20-1200-4Q Information Sur La Sécurité page 6

Safety Information
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
product.
Failure to follow all instructions listed below may result
in electric shock, fire, property damage and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.
Intended Use
This product is designed for installing and removing threaded
fasteners in wood, metal or plastic. Indoor use only.
No other use permitted.
Product Specific Instructions
Product description
1 Output drive
2 Trigger
3 Reverse button
4 Reporting LEDs
The following models are equipped with a front trigger on
delivery.
- EID20-1200-4Q
- EID25-1200
- EID32-900
- EID44-1200
1 Handle trigger
2 Front trigger
This additional trigger is a safety device for the operator
when the tool is equipped for example with a close-ended
head (Crowfoot) or an open-ended head (Tubenut). The oper-
ator has to press both triggers to start the tool.
The management of triggers can be set up with CVI CON-
FIG.
Required accessories
Tool cables
Length (m)
2.5
5
10
15
Tool extension cables
Length (m)
8
16
32
50
Dimensions (mm)
mm
ØA
EID20-120 46
0-4Q
EID25-120 46
0
EID32-900 46
6 / 180
Length (ft) Part number
8.20 6159176010
16.0 6159176020
32.8 6159176040
49.2 6159176050
Length (ft) Part number
26.2 6159175810
52.5 6159175840
105 6159175870
164 6159175890
ØB ØC
37 60
37 60
37 60
L
445
430
430
04/2022