Desoutter EID20-1200-4Q Information Sur La Sécurité page 4

Safety Information
tional direction after any event that can influence the tighten-
ing result. Examples of such events include but are not lim-
ited to:
• initial installation of the tooling system
• change of part batch, bolt, screw batch, tool, software,
configuration or environment
• change of air- or electrical connections
• change in line ergonomics, process, quality procedures
or practices
• changing of operator
• any other change that influences the result of the tighten-
ing process
The check should:
• Ensure that the joint conditions have not changed due to
events of influence.
• Be done after initial installation, maintenance or repair
of the equipment.
• Occur at least once per shift or at another suitable fre-
quency.
EU DECLARATION OF CONFORMITY
We, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint
Herblain, France, declare under our sole responsibility that
the product (with name, type and serial number, see front
page) is in conformity with the following Directive(s):
2006/42/EC, 2014/30/EU, 2011/65/EU
Harmonized standards applied:
EN 62841-2-2:2015 + AC1:2015; EN 61000-6-2:2005; EN
61000-6-4:2007+A1:2011; EN 61326-2-3:2013
Authorities can request relevant technical information from:
Pascal ROUSSY, R&D Manager, 38 rue Bobby Sands,
44818 Saint Herblain, France
Saint-Herblain, 2021/09/10
Pascal ROUSSY, R&D Manager
Signature of issuer
UK Declaration of Conformity
We Ets Georges Renault, 38 rue Bobby
Sands, 44818 Saint Herblain, France, declare
under our sole responsibility that the product
(with name, type and serial number, see front
page) is in conformity with the following UK
Regulation(s):
Electromagnetic Compatibility Regulations 2016
Supply of Machinery (Safety) Regulations 2008
The Restriction of the Use of Certain Hazardous Sub-
stances in Electrical and Electronic Equipment Regula-
tions 2012
Designated Standards applied:
EN 62841-2-2:2014 + AC1:2015; EN 61000-3-2:2019; EN
61000-3-3:2013+A1:2019; EN 61000-6-2:2019; EN
61326-2-3:2013
Saint-Herblain, 2022/01/24
Pascal ROUSSY, R&D Manager
Signature of issuer
Authorities can request relevant technical information from:
UK Authorized Representative:
Air Compressors & Tools Ltd
Zodiac – Unit 4, Boundary way
Hemel Hempstead Industrial Estate, HP27SJ Hempstead
Hertfordshire – UK
Contact: M.Taylor
Noise and Vibration Declaration Statement
• Sound power level < 70 dB(A) , uncertainty 3 dB(A), in
accordance with EN 62841-2-2:2015.
• Vibration total value < 2.5 m/s
accordance with EN 62841-2-2:2015.
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. The vibration emis-
sion level may be used for a preliminary assessment of expo-
sure. These declared values are not adequate for use in risk
assessments and values measured in individual work places
may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend
upon the way the user works, the workpiece and the worksta-
tion design, as well upon the exposure time and the physical
condition of the user.
We, Ets Georges Renault, cannot be held liable for the con-
sequences of using the declared values, instead of values re-
flecting the actual exposure, in an individual risk assessment
in a work place situation over which we have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
www.pneurop.eu/index.php
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.
4 / 180
2 2
, uncertainty 3 m/s , in
http://
and selecting 'Tools' then 'Legis-
04/2022