Publicité
mémoire tampon de journalisation. Exemple : show logging | redirect flash:showlogbackup.txt
5. Assurez-vous que le niveau de tampon de journalisation est défini sur « débogage ».
Augmentez la taille de la mémoire tampon de journalisation à au moins 50 Ko (logging buffer
50000). Il est important de se rappeler que cette étape efface les journaux historiques.
6. Activez le débogage conditionnel et effacez la journalisation (effacez la journalisation)
7. Débloquez le port en question et attendez 30 à 40 secondes au moins pour la négociation PoE.
8. Désactivez le débogage - « undebug all » et collectez la commande « show logging » pour
comprendre les débogages.
9. Annulez toutes les modifications apportées aux étapes 2 à 7.
Voici à quoi ressemble généralement une transaction PoE réussie :
*Mar 6 22:18:33.493: ILP:: ilp enabled in hwidb Gi1/0/4
*Mar 6 22:18:33.493: ILP notify LLDB-TLV: lldp power class tlv:
*Mar 6 22:18:33.493: (curr/prev) pwr value 15400/0
*Mar 6 22:18:33.493: ILP:: ILP CLI 'no shut' handling ( Gi1/0/4 ) Okay
*Mar 6 22:18:33.493: ILP:: Sending poe coredump msg to slot:1
*Mar 6 22:18:33.493: ILP::
Sending E_ILP_GET_DEBUG_CORE_DUMP IPC message from RP to platform
*Mar 6 22:18:33.493: ILP:: ilp hwidb Gi1/0/4 admstate 2
*Mar 6 22:18:33.493: ILP:: ilp hwidb Gi1/0/4 admstate auto, start detect 2
*Mar 6 22:18:33.493: ILP:: ILP CLI 'no shut' handling ( Gi1/0/4 ) Okay
*Mar 6 22:18:33.493: ILP:: ilp enabled in hwidb Gi1/0/4
*Mar 6 22:18:33.494: ILP:: Gi1/0/4: State=NGWC_ILP_SHUT_OFF_S-0,
Event=NGWC_ILP_CLI_START_DETECT_EV-17
*Mar 6 22:18:33.494: ILP:: START_DETECT_EV, shutoff_state Gi1/0/4
*Mar 6 22:18:33.494: ILP:: Sending poe detect msg to slot:1 port:4
*Mar 6 22:18:33.494: ILP::
Sending E_ILP_START_IEEE IPC message from RP to platform
*Mar 6 22:18:34.617: ILP:: ILP:get_all_events: num_port: 1, if_id: 4
*Mar 6 22:18:34.617: ILP:: interface in get_all_events: Gi1/0/4, slot 1, port 4
*Mar 6 22:18:34.617: ILP:: ilp event CLASS DONE <++ Classification done
*Mar 6 22:18:34.617: ILP:: posting ilp slot 1 port 4 event 1 class 4
*Mar 6 22:18:34.617: ILP:: ilp fault 0
*Mar 6 22:18:34.618: ILP:: Gi1/0/4: State=NGWC_ILP_DETECTING_S-2,
Event=NGWC_ILP_IEEE_CLASS_DONE_EV-1
*Mar 6 23:18:34 CET: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD
*Mar 6 22:18:34.618: (Gi1/0/4) data power pool 1 <++ power is taken from a single pool on the
PSE called pool 1
*Mar 6 22:18:34.618: Ilpower PD device 3 class 7 from interface (Gi1/0/4)
*Mar 6 22:18:34.618: (Gi1/0/4) state auto
*Mar 6 22:18:34.618: (Gi1/0/4) data power pool: 1, pool 1
*Mar 6 22:18:34.618: (Gi1/0/4) curr pwr usage 30000
*Mar 6 22:18:34.618: (Gi1/0/4) req pwr 30000 <++ requested power is 30W i.e 30000 mw
*Mar 6 22:18:34.618: (Gi1/0/4) total pwr 857000 <++ total current available PoE on switch 1 is
875000 mw
*Mar 6 22:18:34.618: (Gi1/0/4) power_status OK
*Mar 6 22:18:34.618: ilpower new power from pd discovery Gi1/0/4, power_status ok
*Mar 6 22:18:34.618: Ilpower interface (Gi1/0/4) power status change, allocated power 30000
*Mar 6 22:18:34.618: ILP notify LLDB-TLV: lldp power class tlv:
*Mar 6 22:18:34.618: (curr/prev) pwr value 30000/0 <++ current value 30W and previous value was
0
Publicité
