Télécharger Imprimer la page

Cisco Catalyst 9000 Serie Guide De Dépannage page 17

Masquer les pouces Voir aussi pour Catalyst 9000 Serie:

Publicité

IEEE Class: 4 <++ Success
Discovery mechanism used/configured: Ieee and Cisco
Police: off
Power Allocated
Admin Value: 60.0
Power drawn from the source: 8.9 <++ Success
Power available to the device: 8.9 <++ Success
Actual consumption
Measured at the port: 3.4 <++ Success
Maximum Power drawn by the device since powered on: 3.8
Absent Counter: 0
Over Current Counter: 0
Short Current Counter: 0
Invalid Signature Counter: 0
Power Denied Counter: 0
Power Negotiation Used: CDP
LLDP Power Negotiation --Sent to PD-- --Rcvd from PD--
Power Type:
Power Source:
Power Priority:
Requested Power(W): -
Allocated Power(W): -
Four-Pair PoE Supported: Yes
Spare Pair Power Enabled: No
C9348U#show power inline police gigabitEthernet 1/0/4
Interface
Admin
State
State
--------- ------ ---------- ---------- ---------- ------ -----
Gi1/0/4
auto
C9348U#show platform software ilpower port gigabitEthernet 1/0/4
ILP Port Configuration for interface Gi1/0/4
Initialization Done: Yes
ILP Supported: Yes
ILP Enabled: Yes
POST: Yes
Detect On: No
PD Detected Yes
PD Class Done No
Cisco PD: No
Power is On: Yes
Power Denied: No
PD Type: IEEE
PD Class: IEEE4
Power State: OK
Current State: NGWC_ILP_LINK_UP_S <++ Success
Previous State: NGWC_ILP_LINK_UP_S
Requested Power: 8896
Short: 0
Short Cnt: 0
Cisco PD Detect Count: 0
Spare Pair mode: 0
Spare Pair Arch: 1
Signal Pair Pwr alloc: 0
-
-
-
Oper
Admin
Police
Police
on
none
-
-
-
-
-
Oper
Cutoff
Oper
Power
Power
n/a
n/a
3.4
<++ Verify Operating Power

Publicité

loading