Melitta Caffeo Passione Varianza CS Mode D'emploi page 83

Requirement: The service mode is called up.
1. Press the "Service" button repeatedly until the display for the brewing
temperature service mode appears.
2. Press the "Coffee strength" button repeatedly until the desired brewing
temperature is set.
3. Call up the next basic setting in the service mode or exit the service
mode:
a) Briefly press the "Service" button to navigate to the next basic setting.
b) Press the "Service" button for longer than 2 seconds to exit the ser-
vice mode.
» The new brewing temperature is stored.
7.6 Resetting the appliance to the factory settings
The appliance can be reset to the factory settings.
Information
If the appliance is reset to the factory settings, all personal basic set-
tings in service mode are lost (see section 7.1 Calling up service mode on
page 79).
Requirement: The appliance is ready for operation.
1. Press the "Service" button and also the "Medium cup" direct key.
» The flashing display indicates that the function has been activated.
» The appliance is reset to the factory settings (see Table Factory settings
on page 100).
All manuals and user guides at all-guides.com
Changing basic settings
83