Melitta Caffeo Passione Varianza CS Mode D'emploi page 79

Information
We recommend not only rinsing the Cappuccinatore, but dismantling and
cleaning it at regular intervals (see section 8.3 Cleaning the Cappuccinatore
on page 87).
6.7 Preparing hot water
Prepare hot water on the Cappuccinatore.
CAUTION
Hot water and hot steam flowing out of the pipe
Do not touch the steam pipe during and immediately after use.
ƒ
Wait until the steam pipe has cooled down.
ƒ
Requirement: The appliance is ready for operation. The Cappuccinatore is
connected.
1. Place a vessel beneath the Cappuccinatore.
2. Turn the selector switch of the Cappuccinatore until the setting for hot
water points upwards.
3. Turn the rotary regulator clockwise.
» Beverage dispensing starts.
4. Turn the rotary regulator anti-clockwise up to the stop.
» Beverage dispensing stops.
5. Remove the vessel.
7 Changing basic settings
The following chapter describes how to change the appliance's basic set-
tings.
7.1 Calling up service mode
Some of the basic settings can only be changed in the service mode of the
appliance.
Requirement: The appliance is ready for operation.
1. Press the "Service" button for longer than 2 seconds to call up the service
mode.
» The appliance indicates that it is in one of the service modes described
below.
All manuals and user guides at all-guides.com
Changing basic settings
79