1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat-
ing instructions contain important information on how
to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, re-
duce downtimes and how to increase reliability and
service life of the machine. In addition to the safety
regulations in the operating instructions, you have to
meet the applicable regulations that apply for the op-
eration of the machine in your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con-
cerning the operation of the machine and who are in-
formed about the associated dangers. The minimum
age requirement must be complied with.
18 | GB
2. Device description (Fig. 1 -7)
1.
Handle
2.
Fuel tank cap
3.
Overload display
4.
Earthing connection
5.
Cover
6.
Starter grip
7.
230 V~ socket
8.
Operating display
9.
Fuel tap
10. On/Off switch
11. Choke lever
12. Oil check bulb
13. Silencer
14. Ventilation grille
15. Foot
16. Spark plug cap
17. Oil filler plug
18. Air filter lid
19. Air filter
20. Silencer cap
21. Silencer screen
22. Fuel filter
23. Carburettor
3. Scope of Delivery
A. Tool bag
B.
Funnel/hose for oil
C. Socket wrench
D. Screwdriver
E. Spark plug spanner
F.
Instruction Manual
4. Intended use
The generator is suitable for devices which use a 230
AC voltage source.
Please check the suitability for use of house hold de-
vices on the manufacturer information.
The machine may only be utilised for its intended use.
Any other use is not intended. The user / operator, not
the manufacturer, is liable for resulting damages or
any type of injury resulting from any other use that is
not intended. Please ensure that this device was not
intended for commercial use. We do not accept any
warranty liability if the device is used for commercial,
manual, or industrial operations, or activities similar
to these.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this. Please note that our equip-
ment has not been designed for use in commercial,
trade or industrial applications.
www.scheppach.com