KitchenAid Artisan 5KSM125 Manuel D'utilisation page 14

USING THE STAND MIXER
ATTACHING/REMOVING THE FLAT BEATER, FLEX EDGE BEATER*,
WIRE WHIP, OR DOUGH HOOK
Hold the locking lever in the UNLOCK
2
position and tilt motor head back.
To remove accessory: Repeat steps 1
and 2. Press accessory upward
4
as far as possible and turn to the
left. Then pull accessory from the
beater shaft.
* Included with select models only. Also available as optional accessory.
14 | USING THE STAND MIXER
W10863290A_01_EN_v06.indd 14
All manuals and user guides at all-guides.com
1
3
To attach accessory: Turn speed
control to "0". Unplug Stand Mixer.
Slip accessory onto beater shaft and
press upward as far as possible. Then,
turn accessory to the right, hooking
accessory over the pin on the shaft.
3/30/16 11:18 AM