FujiFilm INSTAX SHARE Smartphone Printer SP-3 Guide D'utilisation page 8

Loading the instax SQUARE Film Pack
(Contunued)
EN
!
⁄
8
All manuals and user guides at all-guides.com
Close the back cover.
Make sure the back
cover lock clicks into
place.
The film cover (black) is ejected
automatically when the back
cover is closed. Remove the film
cover from the print exit.
Turning on/off the Printer
Press and hold the POWER button for approx. 1 second
to turn the printer on or off.
Turning on the printer lights up the remaining battery
LED.
If no operation occurs for a certain period of time, the
printer turns off automatically.
Checking Remaining Battery Life
Use the remaining battery LED to check when turning
the printer on or while printing is in progress.
Indication Remaining battery life
Green Sufficient
Orange At half capacity
Low. Charging the battery is
Red
recommended. (See page 6.)
Printer turns off No battery capacity remains.
after flashing red. Charge the battery. (See page 6.)