FujiFilm INSTAX SHARE Smartphone Printer SP-3 Guide D'utilisation page 15

SPECIFICATIONS
instax SP-3
Recording method
Film
Photo capacity
Image size
Supported image size
Printing resolution
Printing levels
Interface
Supported image format
Printing time
Approximate printing
capacity
Power supply
Charging time
Power consumption
Operating temperature
Dimensions/Weight
Supplied accessory
* Specifications above are subject to change for improvement.
All manuals and user guides at all-guides.com
3-color exposure with OLED
FUJIFILM Instant Film "instax SQUARE" (Purchased separately)
10 prints/pack
62 mm×62 mm
800×800 dots
12.5 dots/mm (318 dpi, 80 μm dot pitch)
256 levels per color (RGB)
Standard compliance: IEEE802.11b/g/n
Operation frequency: 2412 MHz to 2462 MHz (11 ch)
JPEG, PNG
Image recording - photo output (fed out): Approx. 13 sec.
Approx. 160 prints (Based on our test conditions)
* Varies depending on the conditions of use.
NP-50 (1 piece)
Approx. 3 hours (Varies depending on remaining battery level)
3 W
+5°C to +40°C (no condensation)
116 mm × 130.5 mm × 44.4 mm (excluding projections)
312 g (without battery and film pack)
USB cable
(BOB711, Length: 1 m) ,
ferrite core
EN
15