FujiFilm INSTAX SHARE Smartphone Printer SP-3 Guide D'utilisation page 23

COMMON SENSE PRINTER CARE
PRINTER CARE
1 Your printer is a precision instrument. Do not get it wet or drop it. Also, do not expose to sand.
2 If you are not using your printer for a long period, unload the battery and keep it where it will be safe from heat, dust, and
moisture.
3 Do not use solvent such as thinner and alcohol to remove dirt.
4 Keep the film chamber and printer interior clean to avoid damaging films.
5 In hot weather, do not leave your printer in hot places such as in a car or on the beach. Do not leave it in damp places for
long periods.
6 Moth repellent gas such as naphthalene may affect your printer and prints. Be careful to keep your printer or prints in a
chest or bureau.
7 Because your printer is software-controlled, there is the chance that on rare occasions malfunction. If you experience
incorrect operation, reset by removing the batteries and then reloading them after a while.
8 Note that the temperature range within which your printer can be used is +5°C to +40°C.
9 Do not use the printer in aircraft, hospitals or other locations where the use of mobile phones is prohibited.
0 If the printer causes problems with radio or TV reception, move the printer further away from the radio or TV.
- When printing images, carefully read the owner's manual for the sending device being used and ensure that the device's
operating requirements are met.
= Take great care to ensure that printed materials do not violate copyright, image rights, privacy or other personal rights
and do not offend public decency. Actions that violate the rights of others, are contrary to public decency or constitute a
nuisance may be punishable by law or otherwise legally actionable.
~ Make sure the printer stands up vertically; otherwise, it may not deliver the designed performance fully.
! This printer is designed for household use. It is not suitable for commercial printing which requires a large amount of printing.
Cautions during printing
All manuals and user guides at all-guides.com
EN
23