FujiFilm INSTAX SHARE Smartphone Printer SP-3 Guide D'utilisation page 6

Inserting/Charging the Battery (Continued)
Charging the Battery
EN
Be careful of the orientation. Connect the USB cable
with the mark (
Connect the printer and an AC power adapter supplied
with your smartphone using the supplied USB cable, then
connect the AC power adapter to an indoor power outlet.
The remaining battery LED indicates the battery charge
status. For details, see the table on the right column.
• Use an AC adapter to meet the rated output below:
DC 5.0 V/1000 mA
• You can print an image while charging is in progress.
• Charging time is approximately three hours.
6
All manuals and user guides at all-guides.com
) on the terminal facing up.
Charging Indicator
Indication
Lights red (ON)
Charging is in progress.
Flashes red (OFF)
Lights orange (ON)
Charging is half complete.
Flashes orange (OFF)
Lights green (ON)
Charging is almost complete.
Flashes green (OFF)
Flashes green, then
Charging is complete.
goes off (OFF)
Flashes green and
red alternately, or An error has occurred. Stop
flashes red, then charging.
goes off
Charging from a PC:
• Connect the printer and PC directly. Do not connect
them via a keyboard or USB hub.
• If the PC enters sleep mode while charging is in
progress, charging will stop. If you continue charging,
resume the PC and reconnect the USB cable.
• You may not charge the printer from a PC depending
on your PC specifications, settings, or status.
Battery status/Action