Beko GNE 114670 X Mode D'emploi page 14

in the figure. The corner where the
leg exists is lowered when you turn
in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone to
slightly lift the refrigerator will facilitate
this process.
2. After the balance issue is remedied,
install back the ventilation cover and
fasten the screws.
3. Remove the screws fastening
the lower ventilation cover using a
screwdriver.
1
Adjusting the gap between
the upper door
• You can adjust the gap between
the fridge compartment doors as
illustrated in the figures.
Door shelves should be empty when
adjusting the door height.
4
2 3
• Using a screwdriver, remove the
screw of upper hinge cover of the door
you want to adjust.
13
EN