FLORABEST FHL 900 D4 Traduction Des Instructions D'origine page 7

Technical Data
Electrical Hedge Trimmer .........FHL 900 D4
Input voltage rating ...230-240 V~, 50 Hz
Input power ................................ 900 W
Safety class ....................................
Degree of protection
Weight ....................................... 5,8 kg
Cutting length ........................... 410 mm
Cutting capacity .......................... 20 mm
Acoustic pressure level (L
...........................84,5 dB(A); K
Sound power level (L
measured .............95,6 dB(A); K
guaranteed ............................. 99 dB(A)
Vibration (a )
h
at the handle ........................2,083 m/s
at the round handle ..............3,132 m/s
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
........................ IPX0
)
pA
= 3 dB
pA
)
WA
= 3 dB
WA
K = 1,5 m/s
Warning:
The vibration emission value may differ
during actual use of the power tool from
the stated value depending on the manner
in which the power tool is used.
II Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
Notes on Safety
This section deals with the basic safety
2
; regulations to be observed when working
2
with the electric hedge trimmer.
2
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
GB IE
7