FLORABEST FHL 900 D4 Traduction Des Instructions D'origine page 6

GB IE
The operator or user is responsible for ac-
cidents or damage to other people or their
property.
The manufacturer is not liable for damages
caused by unspecified use or incorrect
operation.
Before use, check that the blades
are sharp. Ensure that the blades are
sharpened whenever blunt, in order
to avoid overstressing of the ma-
chine. Damages caused by cutting
with blunt blades are not covered by
the guarantee.
General Description
Extent of delivery
- Long-handled hedge trimmer (two-part)
- Blade protection
- Leg protection
- Shoulder strap
- Round handle
- Allen wrench (in the leg protection)
- Mounting material
- Translation of the original
instructions for use
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Overview
1 Safety blade
A
2 Gearbox
3 Angular gear
4 Stop lever fixing
5 Stop lever
6 Safety lever
7 Handle for adjusting the blade
beam
6
8 Front arm
9 Safety button
10 Pivotal centre
11 Round handle (front handle)
12 Safety slide
13 Deadman switch
14 On/off switch (not visible)
15 Strain relief
16 Mains cable
17 Shoulder strap
18 Eye (for shoulder strap)
19 Leg protection
20 Blade protection
21 Covering cap
A B C
22 Screws
C
K L M
23 Washer (round handle)
24 Assembly block
25 Allen key
U V W
26 Washer
(pivotal centre round handle)
27 Pivotal centre (Round handle)
28 Counter-holder
Function Description
The electric hedge trimmer is driven by an
electronic motor. The equipment is double-
insulated for safety and does not require
earthing.
The hedge trimmer is equipped with a dou-
ble-sided safety cutter bar. When cutting,
the blades move backwards and forwards
in linear motion. The impact protection on
the tip of the cutter bar prevents unpleasant
recoils should the trimmer come into con-
tact with walls, fences and so on.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and briars.
Please note the following descriptions for
the function of the operating components.
D E F
N O P
X Y Z
G H
Q R