Puky CAT 1SP Mode D'emploi page 8

CAT – Tricycle
Maintenance and care
Before using, check all parts for wear and en-
sure that all screw connections are properly
tightened. Self-locking hexagon nuts do not
move freely and must be replaced once com-
pletely removed!
To maintain the high standard of design safety,
any worn or defective parts must be replaced
immediately with PUKY original spare parts.
For safety reasons, the vehicle should not be
used until it is repaired. Do not attempt to
straighten any bend parts but have them
replaced.
Wear parts: wheels, pedal bearings, brakes,
brake caps.
The tricycle should not be cleaned with a
high-pressure cleaner. Clean the tricycle with a
light soapy solution and then carefully wipe the
whole thing dry with a soft cloth. Keep corro-
sive materials (road salt, seawater, fertilizer)
away from the tricycle. The tricycle should not
be stored in a humid area.
Unpacking­and­scope­of­delivery
Do­not­use­any­sharp­objects­to­open­the­
packaging­or­remove­protective­material.­
You­might­accidentally­damage­the­paint­or­
parts­of­the­tricycle.
z Take all the parts out of the packaging.
z Remove the protective material. Keep all
packaging material out of the reach of
children; there is a risk of suffocation.
z Check that no parts are missing or dam-
aged. In case anything is missing, please
contact your specialized dealer before
starting any further work.
The delivery comprises (Figure A):
1. Frame
2. Fork, incl. front wheel and foot pedals
3. Handlebars
4. Seat, incl. screw connection
5. Rear axle with wheels
6. Push bar tube
7. Push bar grip
8. Tipper
9. Shovel (only CAT 1SP)
10. Mesh insert with netting (only CAT 1SP)
11. Footrest (only CAT 1SP)
8