Soehnle Professional 6730 Mode D'emploi page 38

6. Assembly and mounting
6.3 Mounting the scale
1. Insert the lower stand into the weighing platform, using the bolts as guides.
the bolts as guides.
Be careful that the load cell cable does NOT get between these
parts.
Make sure that there are two screw holes on the bottom stand that should be fa-
cing up when reassembling.
2.Insert the four M5 screws and tighten them with a Phillips screwdriver.
3. Remove the two wheels and the axle from the box labeled „PARTS INSIDE".
Position the wheels on the axle, mount them in the groove, and lock them in place
with the M5 screw using a Phillips screwdriver.
38