Optika Italy B-1000 Serie Manuel D'utilisation page 34

16. Microphotography
16.1 Use of "C"mount camera
1. Loosen the clamping screw ① on the trinocular port and re-
move the dust cap ②. (Fig. 65)
2. Screw the C-mount adapter ③ to the camera ④ and insert
the round dovetail of the C-mount into the empty hole of the
trinocular port, then tighten the clamping screw ①. (Fig. 66)
16.2 Use of Reflex camera
1. Insert the Reflex adapter ① into the relay tube to the micro-
scope ②.
2. Screw the "T2" ring ③ (not provided) to the reflex adapter.
3. Connect the Reflex camera ④ to the "T2" ring just installed
(Fig. 67).
4. Mount the other end of the relay tube ② into the empty hole
of the trinocular port, then tighten the clamping screw. (Fig.
65)
• "T2" ring is not provided along with the microscope, but is
commercially available.
• While shooting dark specimens, darken eyepieces and view-
finder with a dark cloth to minimize the diffused light.
• To calculate the magnification of the camera: objective magni-
fication * camera magnification * lens magnification.
• If using an SLR camera, mirror movement may cause the
camera to vibrate.
• We suggest lifting the mirror, using long exposure times
and a remote cord.
Page 34
③
④
③
②
②
①
F ig. 65 F ig. 65
④
F ig. 66 F ig. 66
①
F ig. 67 F ig. 67